800-536-4822
Contact Us for more info!

Deep Drawing Metal Stamping

Small & Medium Deep Drawing Small & Medium Deep Drawing Large Metal Stamping

We can provide complex deep drawn stamped parts up to 16” depth of draw in a 700 or 1100 ton hydraulic press or up to 15” depth of draw in a 1700 ton mechanical press. Additional operations may include trim, pierce and form if required. If volume is too low to justify tooling for these additional operations, Ataco Steel can provide the trim and pierce through 5-axis laser cutting. Request a quote for large deep draw metal stamping.

Ataco Steel is committed to providing defect-free deep draw stampings and on time delivery. We offer pre-design technical support to assist you with process fit and cost effective production design. We also provide prototype and pre-production samples of metal stampings. Ataco Steel is an ISO 9001:2000 certified company. Contact us or call today at 1-800-536-4822 to learn more about deep drawn metal stamping and other fabrication services. Or go here for information on small and medium deep draw stamping and large deep draw metal stamping.

Click here for information on Deep Draw Stamping: Small/Medium Press

Deep Draw Presses
  Tonnage Shut Ht Stroke Bed Size Coil Feeder Part Depth
Large 1700 28.75 20 72 x 180 No 10"
1700 26.25 16 60 x 108 Yes 15"
1100 49 32 63 x 88.2 No 15.7"
1000* 39 30 96 x 68 Yes 15"
800 44 30 72 x 132 No 15"
700 63 VAR 63 x 98.5 No 16"
600 26 14 64 x 108 Yes 7"
Small & Med. 450* 55 49 63 x 74.8 No 12.4"
300 25.625 16 48 x 84 Yes 6"
250 25.5 18 60 x 83.5 No 9"
250 19.5 14 48 x 60 Yes 7"